This checklist is for procurement and product teams who need to approve a Tencel or lyocell fabric order and would rather not discover the real cost three months after the PO goes out. I'm a procurement manager at a 120-person home textiles company. I've managed our fabric budget—roughly $2.4 million annually, give or take currency swings—since 2019, and I've worked with 14 mills across Turkey, Portugal, and China over that period.
Seven checks, in order. Most teams skip number three.
1. Confirm what "Tencel" actually means on the paperwork.
Tencel is a brand name owned by Lenzing. Lyocell and modal are the generic fiber types. So when someone asks what Tencel lyocell is made of, the answer is wood pulp—usually eucalyptus, sometimes beech or other hardwood—dissolved in a solvent and spun through a closed-loop process. The closed-loop part means the solvent is recovered rather than dumped. That's a production fact, not a guarantee that every Tencel-containing fabric is somehow sustainable by default.
What I check: fiber content declaration, mill certification, and whether the supplier can state the actual blend percentage in writing. I've had mills list "Tencel" as if it were a composition. It isn't. "60% lyocell / 40% cotton" is a composition. "Tencel blend" is marketing. Under the FTC's Textile Fiber Products Identification Act, the fiber content has to be disclosed on retail labels—but B2B spec sheets follow looser conventions, so ask for the number.
2. Get wash-test data. Don't accept verbal assurances about shrinkage.
Viscose shrinkage is where a lot of bedding programs get burned. In my experience, standard woven viscose can lose 5% to 8% of its length on the first wash, sometimes more depending on finish and weave density. Lyocell generally holds dimension better, but "better" is not "none." I've seen 3% residual shrinkage on a lyocell sateen that the mill swore was pre-shrunk.
Here's the part people get backwards: the assumption is that shrinkage is a fiber property. The reality is that finishing, weave density, and drying methods during production influence dimensional stability as much as the fiber itself. A well-finished viscose can outperform a badly finished lyocell. AATCC TM135 is the standard test method for dimensional change after home laundering—ask for results against it, not a sentence in an email that says "minimal shrinkage."
3. Ignore the thread count number until you've seen the construction spec.
Thread count is a woven density measure, and the number gets inflated when plied yarns are counted as individual threads. A "510 thread count" sheet and a "300 thread count" sheet can be the same fabric if the 510 uses two-ply yarns counted twice. ASTM D3775 is the standard for fabric count, but most retail marketing doesn't follow it.
One keyword note, because I keep seeing this in search referrals: if you searched for "510 thread vape" and ended up on a bedding article, that's a different product category entirely. 510 is an e-cigarette threading standard. In textiles, "510" would just be a thread count claim—and not a meaningful one on its own. The number needs context: yarn size, ply, weave, and whether the count is single or plied.
What I check: yarn count (e.g., 60s x 60s), picks per inch, and whether plied yarns are counted individually. If the supplier can't answer those three questions in writing, the thread count is decoration.
4. Evaluate polyester by its role in the blend, not its reputation.
Are polyester sheets good? It depends what you're buying them for. I have mixed feelings about polyester blends. On one hand, they hold up to industrial washing, resist wrinkling, and cost less per unit. On the other, they sleep hotter and the cheap versions pill badly after 20 or so washes.
For our hotel segment, a 50/50 cotton-polyester percale outperformed 100% cotton on a cost-per-wash basis over a three-year window. That's not an argument that polyester is better across the board. It's an argument that the comparison depends on what you're measuring. If the buyer is a budget hotel chain washing sheets 200 times a year, the math points one direction. If it's a premium bedding brand selling hand-feel, it points another.
5. Build the TCO sheet before you compare quotes.
This is the step most teams think they already do. They compare unit price per meter and shipping. They leave off defect rate, rework time, and the cost of chasing a vendor when something goes wrong.
A real example from 2023: we had two lyocell jersey quotes. A mill in Portugal quoted $8.20/kg. A Turkish supplier came in at $7.60/kg. The Turkish quote looked 7% cheaper on the line item. Then I added the $350 setup fee for custom dyeing, a 4% defect rate across the previous three deliveries (the Portuguese mill was at 1.2%), and a lead time that was 12 days longer—which meant carrying more safety stock. Landed cost came out to $9.10/kg for the Portuguese mill and $9.45/kg for the Turkish one. The cheap quote wasn't cheap.
I still kick myself about an earlier order, back in 2020, when I didn't document a verbal promise about pre-shrinking. We ended up with a 6% shrinkage problem on a finished duvet program and no contractual grounds to push back. If I'd asked for the wash test in writing, we'd have had a dispute path. Instead we ate the rework.
6. Wash the sample yourself. Don't trust the mill's photo.
Order a sample, cut it in half, wash one half three times at 40°C, tumble dry low, and measure before and after. Compare hand-feel, pilling, and color retention. It takes an afternoon. It has saved me from at least two bad bulk approvals.
Even after we approved that Portuguese lyocell supplier in Q2 2024, I kept second-guessing for the first month. What if the bulk hand-feel didn't match the sample? The two weeks until the first container arrived were genuinely stressful. It worked out—bulk matched within the tolerance we'd agreed—but the doubt wasn't irrational. A sample is a small batch. Bulk production introduces variables.
7. Use retail products as benchmarks—but read the label, not the price.
When we were developing a tencel duvet cover for a mid-market bedding brand, I bought a Pottery Barn tencel duvet cover as a reference. Not to copy it—to calibrate. I wanted to know what hand-feel, drape, and seam construction was reaching customers at that price point. The label composition and the marketing copy weren't saying quite the same thing (which is normal in retail), and the construction was solid but not premium. The useful part wasn't the price. It was having a physical object to show our mill and say "match this hand-feel, not this price."
One caveat: don't compare your B2B cost to a retail price and conclude anything. Retail price includes brand margin, marketing, returns, and shelf space. Different cost structure entirely.
What gets missed
- Treating "Tencel" as a fiber type instead of a brand name—and skipping the actual blend percentage.
- Comparing unit price without adding defect rate, lead-time cost, and safety stock.
- Assuming shrinkage is purely a fiber problem when finishing and drying matter just as much.
- Trusting thread count numbers that include plied yarns counted twice.
- Buying a sample and not washing it.
None of these are exotic mistakes. They're the ones that survive because they're easy to skip when you're behind schedule. The checklist doesn't take long—maybe two extra days on the front end (as of early 2025, with standard mill turnaround). The alternative is finding out about a 6% shrinkage problem after the goods are cut.